Module inflatable emercom
- Availability: In Stock
Характеристики
Характеристики
Характеристики
- length 9 m
- width 5 m
- height 2.9 m
- Usable area/m2 36.96 m2
Характеристики | |
length | 9 m |
width | 5 m |
height | 2.9 m |
Usable area/m2 | 36.96 m2 |
Module deployment time | 15 min |
The capacity of the module | 12-28 people |
Manufacturing technology | Welded joint |
Structure | Arched inflatable frame with longitudinal beams and lower binding is made of frost-resistant, reinforced PVC fabric 650 gr/m2 |
Tent | Non-removable, waterproof awning made of frost-resistant, reinforced PVC fabric 650 gr/m2 |
floor | Waterproof bottom with, made of frost-resistant, reinforced PVC fabric 650 gr/m2 |
The inner tent, insulation | The internal insulated tent is made of a 4-layer complex of heat-saving materials creating an isothermal effect |
Warm floor | Insulated removable floor, made of material "Polyf" 8 mm thick, Packed in tarpaulin. Unfolds to the size of the bottom of the tent. It consists of modules and is connected by a lock "Velcro» |
Main entrance | |
Emergency input | Door-curtain with zipper, size 1800x1800 mm |
Windows | Made of TPU film with mosquito net and a light-protective curtain made of outer awning material, size 600x400 mm |
The sleeves for the heating equipment | 2 piece Ø 320 mm |
Sleeve for power supply | 1 piece Ø 100 mm |
Vent | 2 piece |
Handles for carrying | Convenient handles for carrying the product |
Mounting hardware | Reinforced mounting for fixing the tent |
Temperature / climatic conditions | - 60° C to + 50°C |
Air humidity | Up To 98 % at +25 °C |
Atmospheric pressure | Up to 3000 m above sea level |
Wind speed | Up to 25 m/s (without dust), or up to 20 m/s, with dust saturation up to 5 grams./m ³ |
Rain intensity | Intensity up to 5 mm/min |
Snow load | Up to 25 kg/m2 |
The weight of the module | 1,5х1,1х1 м (с утеплителем и электросетью) |
Country of production | Russia |
Manufacturer warranty | 12 months |
Basic configuration |
Full configuration |
Inflatable
tent |
Inflatable
tent |
Electric
pump |
Insulated
floor |
Rigging (stakes, rope,sledgehammer,pump,valve) |
Insulation
for walls |
Repair
kit (glue+material) |
Power grid (cable, sockets, lamps) |
PVC bag |
The system pressure sensor relay built into the power distribution
Board |
Passport/instruction
manual |
Electric
pump |
Certificates |
Rigging (stakes, rope,sledgehammer,pump,valve) |
Repair kit
(glue+material) |
|
PVC
bag |
|
Passport/instruction
manual |
|
Certificates |